Fairfield OH Damage-Free Wheel Alignment Service

Danco Transmission & Auto Care

Danco Transmission & Auto Care is one of only a few auto repair shops offering a wheel alignment service in the Cincinnati area using the HawkEye Elite® Alignment System from Hunter Engineering. When it comes to alignment technology, most systems used at other wheel alignment shops in the Cincinnati area do not even come close to matching the power of our shop's HawkEye Elite® equipment. The HawkEye Elite® is unequaled when it comes to doing wheel alignments on the intricate components of today's modern vehicles being driven around the Cincinnati area. The HawkEye Elite® uses cameras that are mounted precisely to measure locations and orientations of targets that are mounted on our client's wheels using another incredible technology developed by Hunter known as QuickGrip® adaptors.

Featuring arms that are spring-loaded for optimal gripping of tires, these adaptors minimize tire & wheel damage by eliminating metal-to-metal contact on our Cincinnati area clients' valuable rims. Additionally, the fact that the results can be viewed in as little as 70 seconds, helps to make our Cincinnati shop's overall efficiency rating one of the very best in the entire Hamilton County area, getting our clients and their vehicles back on the road as quickly as possible.

Featuring arms that are spring-loaded for optimal gripping of tires, these adaptors minimize rim damage by eliminating metal-to-metal contact on our Cincinnati area clients' valuable rims. Additionally, the fact that the results can be viewed in as little as 70 seconds, helps to make our Cincinnati shop's overall efficiency rating one of the very best in the entire Hamilton County area, getting our clients and their vehicles back on the road as quickly and safely.

Quick Setup & Results
The HawkEye Elite® returns results 70 seconds.

Reduced Setup Time
Alignments require but one trip around the vehicle.

Fast Accurate Measurements
Camber, toe, and caster are represented with easy-to-understand graphics.

Cincinnati Wheel Alignment

The technology of the HawkEye Elite® used at our Cincinnati shop is undoubtedly beyond that found with other alignment machines found at most other Hamilton County area automotive repair places. Listed below are comparisons between what is used by the technicians at Danco Transmission & Auto Care with older systems employed by other auto mechanics in the Cincinnati area. Combined with other equipment used by Danco Transmission & Auto Care, this cutting-edge technology is what helps to distinguish our business as one of the best in the Cincinnati area when it comes to fixing & servicing vehicles.

70-second Results

Precise accuracy is achieved with the 4 strategically placed cameras. QuickGrip® adaptors offer quick readings with their narrow and light design.

  • 1 walk circling vehicle
  • 0 console interactions
  • 72  total steps
4 Minutes

Traditional rack technology utilizing camera-sensors yielded 4-minute results, better than older technology, but not good enough.

  • 3 walks circling vehicle
  • 6 console interactions
  • 183 total steps
10+ Minutes

It required 10 minutes to yield results with an antiquated conventional wheel-mounted sensor system using traditional rack technology.

  • 4 walks circling vehicle
  • 6 console interactions
  • 246 total steps
  • 1
    Minute
  • 4
    Minute
  • 10+
    Minutes
Cincinnati Tire Alignment
Unequaled Setup Time
Decreased setup time with QuickGrip® technology

Fast installation
Advanced clamping technology installs easily, with off-center placement not compromising efficiency.

Rim damage avoided
No metal-to-metal contact with protective ring & clamps hooking tires

Optimal design
QuickGrip® adaptors are greatly appreciated by our expert team of technicians.

Cincinnati Quick Wheel Alignment
Ease of Clamping
  • Tires gripped by spring-loaded arms
  • Clamp secured with thumb screw
  • Accuracy unaffected by off-center clamping
Metal-to-metal Contact Avoided
  • Only tired is gripped
  • Rims safeguarded by protective ring
Lightweight & durable
  • 50% lighter (6 pounds) than former designs
  • Void of electronics, cables, or calibration
  • Minimal cleaning needed
Sleek Design
  • Profile Approximately 9-inches
  • Ease to work with
  • Perfect for narrow shop bays
Fast Change Arms
  • Assemblies 37 inch & below accommodated
  • 90% of applications work with one arm
Off-center application

Actual wheel position calculated by WinAlign® software, regardless of target centering

Cincinnati Wheel Clamp
Pre & Post Scans

Connection with OBD-II port & VCI (Vehicle Communication Interface) enables ease of diagnosis & interaction.

Dynamic Calibrations

Dynamic calibration when operating vehicle when necessary.

Forward-Facing Radar & Camera Calibrations

Vehicle's front camera & radar sensors calibrated as related to direction of travel.

Blind Spot & Surround View Calibrations

Rear & side vehicle sensors calibrated that driver uses for possible hazards beyond field-of-vision.

Cincinnati Alignment Scan
Steering angle sensor reset

Vehicle's OBD-II is integrated with patented CodeLink® system to "connect" the steering angle sensors and the aligner to vehicle's specific alignment geometry.

110+ million vehicles require reset

Since 2009, Hunter's equipment has supported resets of electronic steering systems. Numerous vehicle systems utilize electronic steering system output for determining the direction of travel.

Aligner integration

CodeLink® wirelessly integrates with Hunter WinAlign® systems using simplified guides aligner screen.

Cincinnati Alignment sensor
Award-Winning

Danco Transmission & Auto Care uses the best tools & equipment for the clients of our auto repair shop in the Cincinnati area. Below are but a few of the awards earned by Hunter that exemplify the quality of technology used by our alignment specialists.

Extensive database
WinAlign® used by Danco Transmission & Auto Care is powered by an extensive vehicle database for 285 million vehicles in North America.

Vehicle-specific procedures
Our alignment technicians use detailed instructions specific to each vehicle being aligned.

30+ years of development
Danco Transmission & Auto Care benefits from Hunter's dedication to continual improvement using the undercar industry's largest R&D department.

ExpressAlign®

Every alignment done by Danco Transmission & Auto Care is a streamlined procedure. Each job is analyzed and the best sequence of actions dictates the minimum amount of required steps.

WinToe®

Straightened steering wheel achieved every time without requiring repeated steps or using a holder.

Tools& Part Information

Save trips back and forth to the toolbox by seeing all of the tools and aftermarket correction kits needed for each alignment. Efficiency is achieved by minimizing trips to the tool box when viewing all necessary tools and aftermarket correction kits for each service.

Virtual View®

Visual representation of caster, camber, and toe angles in real-time 3-D graphics.

Control Arm Movement Monitor®

Step-by-step graphics reduce adjustment times significantly for front-shim, dual cam, or dual-slot vehicles and ensure the job is completed on the first attempt.

Cincinnati Alignment
Suspension Audit

Ease of vehicle screening to determine collision & alignment needs

Shim-Select IIĀ®

Difficult shim charts & tables are avoided. Shim-Select II® efficiently determines and displays the required template needed for proper installation of shim.

Symmetry Angle Measurements

Symmetry angles accessed immediately.

Automatic Bushing Calculator®

Correct bushing size and position adjustment are achieved without wasting time utilizing a zero bushing, benefiting more than 10 million vans and light trucks.

Live Ride Height Adjustment

Real-time measurement and adjustment of ride height.

Cincinnati Alignment
  • Call Us